MTP MTP-1032, Instruction Manual

Page: 7 / 14

6. Measurement
WARNING

Please refer to section 2 of this manual
(Safety Warnings)
 Self-diagnostic test should be done prior to measurements to confirm that LED
and buzzer works properly.
 Verify proper operation on a known source before and after use.
 Keep your hand and fingers behind the barriers on the probes during
measurements.
6.1 Voltage test (double pole test)
 Connect both probes to the object under test.
 The voltage is indicated by LEDs and LCD
Live circuit LED lights up: ≥7V

Voltage polarity is indicated in following manner:
Note
When the L2 probe + is the positive (negative) potential, the polarity indication LED
indicates "+DC" ("-DC") .
5
www. .com
information@itm.com 1.800.561.8187