FREEDOM CORE II
™ POWER/SCREAMER SENSOR
8
MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
1
3
5
2
4
6
CHANGING THE ANCHOR
Insert IntelliKey into Power Screamer port until LED
turns green.
Unplug the power supply from the Power/Screamer
Anchor and remove the Power/Screamer Sensor cable
(if needed).
Remove excess VHB by rolling it off the surface.
Remove the three screws in the top of the Power/
Screamer Anchor using the Double-Sided System Tool.
Hold the Adhesive Pad Removal Tool with both hands
and using a sawing motion, pull one side of the tool,
then the other back and forth until the VHB is released
from the Power/Screamer Anchor.
Clean the Power/Screamer Anchor with an alcohol swab
and let air dry or wipe dry with a clean cloth. Replace
VHB with extra pads provided.
-CONTROLLED DOCUMENT-
063-00229
A-0
Status: Approved
ECO-106737
ECO-106737
