FREEDOM CORE II
™ POWER/SCREAMER SENSOR
9
MTI P/N 063-00229 rev A ©2018 MTI All Rights Reserved
www.mobiletechinc.com | T:800.426.6844
1
2
3
REMOVAL
Attach the cup to the riser shell and interior bracket
using the two screws.
To remove the screwed down position, simply reverse
the installation process. To remove a VHB position, Hold
the Adhesive Pad Removal Tool with both hands and
using a sawing motion, until the VHB is released from
the base plate. Remove excess VHB by rolling it off the
surface.
Mount the internal riser bracket either by applying VHB
to the bottom and placing it in the desired location or
by screwing the bracket to the surface of the fixture.
Place the riser shell over the internal bracket.
SENSOR RISER
-CONTROLLED DOCUMENT-
063-00229
A-0
Status: Approved
ECO-106737
ECO-106737
