MTI AccuMeasure 9000, User Manual, Page: 4 / 32

ii
WARRANTY
Seller warrants to the Purchaser that equipment to be delivered hereunder which is of Seller's own
manufacture will be free from defects in material or workmanship and will be of the kind and quality
designed or specified in the contract. Any parts of the equipment which have been purchased by Seller
are warranted only to the extent of the original manufacturer's warranty.
This warranty shall apply only to defects appearing within 1 year from the date of shipment by Seller. If the
equipment delivered hereunder does not meet the above warranty, and if the Purchaser promptly notifies
Seller, Seller shall thereupon correct any defect, including nonconformance with the specifications, either,
at its option, by repairing any defective or damaged parts of the equipment, or by making available at
Seller's plant necessary repaired or replacement parts. No allowance will be made for repairs or
alterations made by others without Seller's written consent or approval. Seller assumes no responsibility
for damage caused by improper installation or by operation in violation of its rated operating condition,
intentional or otherwise, or by improper handling or maintenance. The liability of Seller under this warranty
(except as to title), or for any loss or damage to the equipment, whether the claim is based on contract or
negligence, shall not in any case exceed the cost of correcting defects in the equipment as herein
provided and upon the expiration of the warranty period of all such a liability shall terminate. The foregoing
shall constitute the exclusive remedy of the purchaser and the exclusive liability of the Seller.
The foregoing warranty is exclusive and in lieu of all warranties, whether written, oral, implied or statutory
(except as to title). There are no warranties which extend beyond those expressly stated in this contract.
FCC NOTICES
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the manufacturer’s instruction manual, may cause interference with radio and television
reception. This equipment has been designed as a Class A digital device of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference in a commercial installation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference, which can be determined by turning the equipment off and on, you are
encouraged to try to correct the interference by one or more of the following measures:

Relocate the instrument with respect to the other device.

Plug the instrument into a different outlet so that the instrument and the other device are on
different branch circuits.
If necessary, consult a representative of MTI Instruments. You may find the following booklet helpful: FCC
Interference Handbook , 1986, available from the U.S. Government Printing Office, Washington, D.C.
20402, Stock No. 004-000-00450-7.
Information in this manual is subject to change without notice.
© 2013 MTI Instruments