7
3) To fill the BP Sprayer with On & Gone, remove lid of the spray tank. Ensure the
strainer is in place and clean of residual particles. Slowly pour On & Gone through the
strainer (up to 16 Ltr / 4.0 Ga.) *Never submerge BP Sprayer in water or chemicals
during filling or cleaning.
4) While spraying, carry the BP Sprayer (manually or on your back with adjustable strap)
to target area. The combined power and pressure regulating switch is located on the side
of the BP Sprayer. Point the nozzle to surface and hold down the shut off handle to start
spraying. Shut-off handle can be set intermittently or continuously by adjusting ‘the red
knob on the handle.
5) To regulate pump pressure, turn the regulating knob clockwise to increase the pressure
and counter-clockwise to decrease the pressure and shut-off sprayer. Volume of pressure
will depend on type of spray tip. The BP Sprayer has overload protection, when the
sprayer gun is closed or the spray nozzle is blocked, the pump will relieve the pressure
automatically.
Warehousing of BP Sprayer
The BP Sprayer should be stored in a dry place, out of reach of children. Do not store unit
upside down as it may damage the battery
