USER MANUAL
MTU AIS-C
Page 40
R
v0
1
9.2.
COMPATIBLE EXTERNAL DEVICES.
The MTUAIS unit currently accepts the following external devices that can be configured in
different combinations ("options") and the data used to populate the message #8 of
Meteorological and Hydrological Data. Two formats of this message are allowed: DAC 001, FI 31
and DAC 001, FI 11.
•
Airmar Weather Station PB200 / 150WX
•
Impress S12C Water Temperature and Pressure Probe
•
Young RM anemometer
•
Current meter AEM-R JFE Advantech Co.
•
Vaisala WXT520 Weather Transmitter
•
RM Young Weather Station
•
Nortek AS Aquadopp profiler
•
Gill Metpak Weather Station
•
Valeport TideMaster tide meter
Only some combinations of sensors are possible due to the limitations of the interface sensor
board as detailed in the attached table.
By default the sensor board the interface is configured to the connection with the Airmar 150-
WX meteorological station through the RS port-422 or RS-232 and the Impress tidal meter using
B RS-232 port. Contact your provider to configure the interface board to operate with other
devices.
The Sensor Interface Board can also be adapted to accept almost any equipment that can be
found in an AtoN application. If your application requires an interface with another device that
is not included in this list, contact your provider to discuss your requirements.
RS-422
RS-232 A
Airmar 150WX*
Young RM anemometer
Advantech current meter
Vaisala Weather Station
Aquadopp Current Profiler
Young RM anemometer
Aquadopp Current Profiler
Vaisala Weather Station
Advantech current meter
RM Young Weather Station
MetPak Weather Station
Valeport Tide Meter
* This device can be connected via RS422 or RS232
Note: The Impress S12C Water Temperature and Pressure Probe is connected via the SDI-12-
interface (which disables the RS-232 B port).
