USER MANUAL
MTU AIS-C
Page 21
R
v0
1
5.3.
MTU-AIS CONFIGURATION
The following sections show the possible configuration options.
Setting up an AIS AtoN device requires technical knowledge of the AIS System and keep in mind
the recommendations of IALA A-126.
The AIS environment present at each site should be known, especially when selecting the
broadcast slots.
Before setting up the MTU-AIS we must press the connect button, and at the end we must press
disconnect.
5.3.1.
ATON-REAL CONFIGURATION.
On the next screen you can configure the parameters for the Real AIS-AtoN
STANDARD or INLAND MODE
The Standard Mode is the one used in maritime navigation and the "inland" mode is the one
used in navigation in river channels in Europe.
In "inland" mode, msg 21 controls related to the Racon and beacon are disabled.