
2-18
Hardware Setup
MS-S0391
Hardware Setup
MS-S0391
Jumper
Clear CMOS Jumper: JBAT1
There s a CMOS RAM onboard that has a power supply from an external battery
to keep the data of system configuration. With the CMOS RAM, the system can
automatcally boot OS every tme t s turned on. If you want to clear the system
configuration, set the jumper to clear data.
Normal
1
JBAT1
1
Clear CMOS
1
Important
You can clear CMOS by shorting pins 2 and 3 while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will dam-
age the mainboard.
ME Jumper: J2
This connector is provided for setting ME firmware update.
1
1
Enable
Dsable