3 - 7
BIOS Setup
Access M ode
The settings are CHS, LBA, Large, Auto.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Pr eco mp
W rite precompensation.
Landing Z one
Cylinder location of the landing zone.
Sector
Number of sectors.
Drive A
This item allows you to set the type of floppy drive installed. Available options: [None],
[360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.].
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Available options are:
[All Errors]
The system stops when any error is detected.
[No Errors]
The system doesn
’
t stop for any detected error.
[All, But Keyboard]
The system doesn
’
t stop for a keyboard error.
[All, But Diskette]
The system doesn
’
t stop for a disk error.
[All, But Disk/Key]
The system doesn
’
t stop for either a disk or a key-
board error.
System Information
Press <Enter> to enter the sub-menu and the following screen appears:
CPU Type/BIOS Version/System M emory/Total Memory
The items show the CPU type, BIOS version and memory status of your
system (read only).
MSI Reminds You...
IDE Third/ Fourth/ Fifth/ Sixth Master
are appearing when you
connect the HD devices to the SATA connector on the mainboard.