2-18
M S-7100 ATX M ainboard
CD-In Connector: JCD1
The connector is for CD-ROM audio connector.
JCD1
S eri al ATA/ S eri al ATA RAID Con n ect o rs co nt ro ll ed b y
nForce4 SLI: SATA1 / SATA2 / SATA3 / SATA4;
S eri al ATA/ S eri al ATA RAID Con n ect o rs co nt ro ll ed b y
Silicon Image
’
s SATARAID: SATA5 / SATA6
The single chip of this mainboard is nForce4 SLI which supports four serial
ATA connectors SATA1~SATA4. Silicon Image
’
s SATARAID of this mainboard sup-
ports another two serial ATA connectors SATA5/ SATA6.
SATA1~SATA6 are high-speed Serial ATA interface ports. Each supports serial
ATA data rates of 300MB/s. Both connectors are fully compliant with Serial ATA 1.0
specifications. Each Serial ATA connector can connect to 1 hard disk device. Please
refer to the
nVidia RAID Introduction
&
Silicon Image RAID Introduction
for detail
software installation procedure.
PIN
SIGNAL
PIN
SIGNAL
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
SATA1~ SATA6 Pin Definition
MSI Reminds You...
Please do not fold the serial ATA cable in a 90-degree angle, which will
cause the loss of data during the transmission.
Take out the dust cover and
connect to the hard disk
devices
GND
R
L
Connect to serial ATA ports
Serial ATA cable
(optional)
SATA4
SATA3
1
7
SATA2
SATA1
1
7
SATA5
1
7
SATA6
1
7
GND