6 - 7
nVIDIA RAID Introduction
Installing the RAID Driver (for bootable RAID Array)
1. After you complete the RAID BIOS setup, boot from the W indows CD, and the
W indows Setup program starts.
2. Press
F6
and wait for the W indows Setup screen to appear.
3. Specify the NVIDIA drivers:
(1) Insert the floppy that has the RAID driver, press S, then press Enter. The
W indows Setup screen appears as below:
MSI Reminds You...
Please follow the instruction below to make an nVIDIA Serial ATA RAID
driver for yourself.
1. Insert the MSI CD into the CD-ROM drive.
2. Ignore the Setup screen and use
“
Explorer
”
to browse the CD.
3. C o py a ll t he c on te nts ( in c lud in g th e s ub -f olde rs ) in t he
\\nVidia\System\CK804\IDE\Win2k-XP\
to a formatted floppy
disk.
4. The driver disk for nVIDIA Serial ATA driver is done.
(2) Select
“
NVIDIA RAID CLASS DRIVER
”
and then press
Enter
.
(3) Press
S
again at the Specify Devices screen, then press
Enter.
(4) Select
“
NVIDIA NForce Storage Controller
”
and then press
Enter.
The follow-
ing W indows Setup screen appears listing both drivers: