AMI BIOS Setup
3-15
Re-Call VGA BIOS At S3 Resuming
This setting allows the system to initialize the VGA BIOS when system resumes
from S3 (Suspend to RAM). Settings:
Enabled
and
Disabled
.
Power Management/APM
Setting to
Enabled
will activate an Advanced Power Management (APM)
device to enhance Max Saving mode and stop CPU internal clock. Settings are
Disabled
and
Enabled
.
Power Button Function
This feature sets the function of the power button. Settings are:
On/ Off
The power button is a normal power on/off function key.
Suspend
When you press the power button, the computer enters
the suspend/sleep mode, but if the button if pressed for
more than four seconds, the computer is turned off.
Restore on AC/Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settings are:
Power Off
Leaves the computer in the power off state.
Power On
Reboots the computer.
Last State
Restores the system to the status before power failure or
interrupt occurs.
Set Monitor Events
Press <Enter> to enter the sub-menu and the following screen appears:
MIDI Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified
hardware peripheral or component. If set to
Monitor
, any activity
detected on the specified hardware peripheral or component will wake
up the system or prevent the system from entering the power saving
modes. Settings:
Monitor and Ignore
.
All manuals and user guides at all-guides.com
