manualshive.com logo in svg

MSI MS-6566E, Manual

Share
Download
MSI MS-6566E Manual Download Page 18

Getting Started

1-11

Live Monitor™

The Live Monitor™ is a tool used to schedule the search

for the latest BIOS/drivers version on the MSI Web site.  To use

the function, you need to install the “MSI Live Update Series 2”

application.  After the installation, the “MSI Live Monitor” icon

(as shown on the right) will appear on the screen.  Double click

this icon to run the application.

Double click the “MSI Live Monitor” icon 

 at the lower-right corner

of the taskbar, and the following dialog box will appear.  You can specify how

often the system will automatically search for the BIOS/drivers version, or

change the LAN settings right from the dialog box.

You can  right-click the MSI Live Monitor icon 

 to perform the functions

listed below:

l

l

l

l

l

Auto Search

 – Searches for the BIOS/drivers version you need immediately.

l

l

l

l

l

View Last Result

 – Allows you to view the last search result if there is any.

l

l

l

l

l

Preference

 – Configures the Search function, including the Search schedule.

l

l

l

l

l

Exit

 – Exits the Live Monitor™ application.

All manuals and user guides at all-guides.com

Summary of Contents for MS-6566E













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands