manualshive.com logo in svg

MSI MS-6566E, Manual

Share
Download
MSI MS-6566E Manual Download Page 65

AMI BIOS Setup

3-21

Integrated Peripherals

USB Controller

This setting is used to enable/disable the onboard USB ports. Settings:

Disabled

,

 2 USB ports, 4 USB port, 6 USB ports

.

USB 1.1 Device Legacy Support

Set to 

All Device

s if you need to use any USB 1.1 device in the operating

system that does not have any USB 1.1 driver installed, such as DOS and SCO

Unix.  Set to 

No Mice 

only if you want to use any USB 1.1 device other than the

USB mouse.  Setting options: 

All Device, No Mice, Disabled

.

Onboard IDE

This allows you to enable or disable on-chip IDE controller.  Settings: 

Disabled,

Primary, Secondary, both

.

Onboard AC’97 Audio

Enabled

 allows the mainboard to detect whether an audio device is used. If the

device is detected, the onboard AC’97 (Audio Codec’97) controller will be

enabled; if not, it is disabled. Disable the controller if you want to use other

controller cards to connect an audio device. Settings: 

Enabled

, 

Disabled

.

All manuals and user guides at all-guides.com

Summary of Contents for MS-6566E













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands