AMI BIOS Setup
3-23
options for IR function).
IR Pin Select
Set to
IRRX/IRTX
when using an internal IR module connected to the IR
connector. Set to
SINB/SOUTB
when connecting an IR adapter to COM
2.
OnBoard Parallel Port
These items specify the base I/O port addresses of the onboard parallel port.
Selecting
Auto
allows AMIBIOS to automatically determine the correct base I/
O port address. Settings:
Auto, 378, 278, 3BC and Disabled.
Parallel Port Mode
This item selects the operation mode for the onboard parallel port:
ECP,
Normal, Bi-Dir or EPP.
EPP Version
The item selects the EPP version used by the parallel port if the port is set
to
EPP
mode. Settings:
1.7
and
1.9
.
Parallel Port IRQ
When
Parallel Port
is set to
Auto
, the item shows
Auto
indicating that
BIOS determines the IRQ for the parallel port automatically. Settings:
5, 7,
Auto
.
Parallel Port DMA Channel
This feature needs to be configured only when
Parallel Port Mode
is set
to the
ECP
mode. When Parallel Port is set to
Auto
, the field will show
Auto
indicating that BIOS automatically determines the DMA channel for
the parallel port. Available options:
0, 1, 3, Auto
.
OnBoard Midi Port
The field specifies the base I/O port address for the onboard Midi Port. The
settings are:
Disabled, 330, 300, 310 and 320
.
Midi IRQ Select
The item is used to select the IRQ line for onboard Midi port. Options:
3, 4, 5, 7, 10, 11
.
OnBoard Game Port
This item is used to specify the address for the onboard game port. The
settings are:
Disabled, 200, and 208
.
All manuals and user guides at all-guides.com