Texas Instruments ADS1610EVM, User Manual

Page: 1 / 28

User's Guide
SLAU180A – May 2006 – Revised August 2006
ADS1610EVM
This user’s guide describes the characteristics, operation, and use of the ADS1610
16-bit, 10-MSPS high-speed, parallel interface, analog-to-digital converter evaluation
board. A complete circuit description, a schematic diagram, and a bill of materials is
included. Contact the Product Information Center or e-mail dataconvapps@list.ti.com
for questions regarding this EVM.
Contents
1 EVM Overview
......................................................................................
2
2 Introduction
..........................................................................................
2
3 Digital Interface
.....................................................................................
4
4 Power Supplies
.....................................................................................
8
5 Using the EVM
......................................................................................
8
6 Related Documentation from Texas Instruments
.............................................
13
Appendix A Bill of Materials
..........................................................................
14
Appendix B Layout and Schematic
..................................................................
17
List of Figures
1 Input Circuitry
.......................................................................................
3
2 TSW1100 and ADS1610EVM Setup
.............................................................
8
3 TSW1100 Screen Shot
............................................................................
9
4 Test Results With a 100-kHz Input Frequency
................................................
10
5 Test Results With a 250-kHz Input
.............................................................
10
6 Test Results With a 500-kHz Input
.............................................................
11
7 Test Results With a 1-MHz Input
...............................................................
11
8 Test Results With a 2-MHz Input
...............................................................
12
B-1 Top Layer – Layer 1
..............................................................................
17
B-2 Split Ground Plane – Layer 2
....................................................................
17
B-3 Split Power Plane – Layer 3
.....................................................................
18
B-4 Split Power Plane – Layer 4
.....................................................................
18
B-5 Split Ground Plane – Layer 5
....................................................................
19
B-6 Bottom Layer – Layer 6
..........................................................................
19
List of Tables
1 Reference Voltages
................................................................................
3
2 Jumper Setting
......................................................................................
4
3 Switch Function Control, SW1
....................................................................
4
4 Digital Jumper
.......................................................................................
5
5 Memory Space Address
...........................................................................
6
6 Assignment and Function at J18
.................................................................
6
7 Assignment and Function at J2
...................................................................
7
8 Assignment and Function at J10/P10
............................................................
7
SLAU180A – May 2006 – Revised August 2006 ADS1610EVM 1
Submit Documentation Feedback