background image

Overview

1-2

System Overview

Front View

7

6

2

3

4 5

1

1

Headphone Jack

This connector is provided for headphones or speakers.

2

Microphone Jack

This connector is provided for microphones.

3

USB 3.0 Port

The USB (Universal Serial Bus) port is for attaching USB devices such 

as keyboard, mouse, or other USB-compatible devices. It supports up 

to 5Gbit/s (SuperSpeed) data transfer rate. The USB 3.0 port is back-

ward-compatible with USB 2.0 devices.

4

Power Button/ LED

Press the power button to turn the system on and off. The power LED 

glows when the system is turned on and goes off when the system is 

shut down. In terms of power saving, the LED blinks in S3 (Suspend 

to RAM) mode and goes off in S4 (Suspend to Disk) mode. Pressing 

the system power button will wake the system up from power saving 

mode.

Packing Contents

Hetis H61 Ultra

Stand

AC Power Cord

Driver/ Utility Disk

User Manual

* Please contact us immediately if any of the items is damaged or missing.

* The illustrations are for reference only and your packing contents may slightly vary 

depending on the model you purchased.

Summary of Contents for Hetis H61 Ultra















































Reviews: