MSI Hetis 800 Series, User Manual

Page: 55 / 80

3-15
BIOS Setup
occurs. Setting options:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Former-sts] Restores the system to the status before power failure or
interrupt occurred.
Set Wakeup Event
Press <Enter> to enter sub-menu and the following screen appears:
PowerOn by PCI Card
This controls how and whether the system can be powered on by the devices
installed on PCI slots. Setting options:
[Disabled], [Enabled].
PS2KB Wakeup Select
The item specifies how the system will be awakened from power saving mode
when input signal of the keyboard is detected.
PS2KB Wakeup from S3/S4/S5
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected.
RTC Alarm Resume
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 power off state. Setting options:
[Disabled], [Enabled].
Date (of Month)
The field specifies the date for RTC Alarm Resume . Settings: [0]~[31].
Resume Time (hh:mm:ss)
The field specifies the time for RTC Alarm Resume . Format is <hour><minute>
<second>.