M S-6415 Barebone
A-2
You need to install the driver for VIA VT1617AG chip to function properly before you
can get access to 4-/6-channel audio operations. Follow the procedures described
below to install the drivers for different operating systems.
Installation for Windows 98SE/ME/2000/XP
For W indows
®
2000, you must install W indows
®
2000 Service Pack2 or later before
installing the driver.
The following illustrations are based on W indows
®
XP environment and could look
slightly different if you install the drivers in different operating systems.
1.
Insert the companion CD into the CD-ROM drive. The setup screen will automati-
cally appear.
2.
Click
VIA Smart5.1CH Sound Drivers
.
Click here
Special Notice during Installation
Onc e you are finishing the installation of your
system, please right-click on [My Computer] on the
desktop, and choose [Properties] ---> [Hardware] -
--> [Device Manager]. If you can see the question
mark (?) next to the <Other devices> & <Multimedia
Audio Controller>, it means the system detects the
audio codec in your s ys tem item and the
VIA
Smart5.1CH Sound Drivers
will appear on your
CD.
Installing the Audio Driver
Summary of Contents for Hetis 800 Series
