MSI Hetis 800 Series, User Manual

Page: 30 / 80

2-9
Hardware Setup
DIMM Module Combination
Install at least one DIMM module on the slots. Each DIMM slot supports up to
a maximum size of 1GB, and do not support single 1GB RAM. Users can install
either single- or double-sided modules to meet their own needs. Please note that each
DIM M can work respectively for single-channel DDR2, but there are some
rules while using dual-channel DDR2. Users may install memory modules of different
type and density on different-channel DDR DIMMs. However, the same size, type and
density memory modules are necessary while using dual-channel DDR, or instability
may happen. Please refer to the following table for detailed dual-channel DDR. Other
combination not listed below will function as single-channel DDR.
DDR 2
(Bank 2 & 3)
S/D 128MB~1GB (D)
Maximum System Memory Supported 128MB~2GB (D)
DDR 1
(Bank 0 & 1)
S/D 128MB~1GB (D)
S: Single Side D: Double Side
Slot Memory Module Total Memory
Installing DDR2 Modules
1. The DDR2 DIMM has only one notch on the center of module. The Module will
only fit in the right orientation.
2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until
the golden finger on the memory module is deeply inserted in the socket.
3. The plastic clip at each side of the DIMM slot will automatically close.
1. Hetis 800 DIMM Module do not support single 1GB RAM.
2. Each DIMM slot supports up to a maximum size of 1GB.
Important