iv
1.
Always read the safety instructions carefully.
2.
Keep this User
’
s Manual for future reference.
3.
Keep this equipment away from humidity.
4.
Lay this equipment on a reliable flat surface before setting it up.
5.
The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
6.
Make sure the voltage of the power source and adjust properly 115/230V
before connecting the equipment to the power inlet.
7.
Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8.
Always Unplug the Power Cord before inserting any add-on card or module.
9.
All cautions and warnings on the equipment should be noted.
10.
Never pour any liquid into the opening that could damage or cause electrical
shock.
11.
If any of the following situations arises, get the equipment checked by a
service personnel:
- The power cord or plug is damaged.
- Liquid has penetrated into the equipment.
- The equipment has been exposed to moisture.
- The equipment has not work well or you can not get it work according to
User
’
s Manual.
- The equipment has dropped and damaged.
- The equipment has obvious sign of breakage.
12.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,
STORAGE TEMPERATURE ABOVE 40
0
C (102
0
F), IT MAY DAMAGE THE
EQUIPMENT.
Safety Instructions
C AUT ION:
D anger of explos ion if battery is inc orrec tly replac ed.
R eplace only with the same or equivalent type recommended by the
manufacturer.
Summary of Contents for Hetis 800 Series
