MSI Digital@nywhere-ATSC, User Manual

Page: 4 / 54

iv
Important Safety Precautions
Always read and follow these basic safety precautions carefully when handling
any piece of electronic component.
1. Keep this User
’
s Manual for future reference.
2. Keep this equipment away from humidity.
3. Lay this equipment on a stable, flat surface before setting it up.
4. The openings on the enclosure are for air convection, hence they
protect the equipment from overheating.
5. Make sure the voltage of the power source and adjust properly
110/220V before connecting the equipment to the power inlet.
6. Place the power cord in a way that people are unlikely to step on it. Do
not place anything on the power cord.
7. Always Unplug the Power Cord before inserting any add-on card or
module.
8. All cautions and warnings on the equipment should be noted.
9. Never pour any liquid into the opening that could damage the
equipment or cause an electrical shock.
10. If any of the following situations arise, get the equipment checked by
a service personnel:
†
The power cord or plug is damaged
†
Liquid has penetrated into the equipment
†
The equipment has been exposed to moisture
†
The equipment has not functioned properly or in accordance
with the User
’
s Guide
†
The equipment was dropped and damaged
†
The equipment has obvious signs of breakage
11. DO NOT LEAVE THE EQUIPMENT IN AN UNCONDITIONED
ENVIRONMENT WITH A STORAGE TEMPERATURE OF 60 0 C (140 0 F)
OR ABOVE. IT MAY DAMAGE THE EQUIPMENT.