3-13
BIOS Setup
Onboard BCM GB LAN
This field controls the onboard BCM GB LAN controller. Setting options: [Enabled],
[Disabled].
PCI-E Compliancy Mode
This field specify the PCI-E compliable mode. Setting options: [v1.0a], [v1.0].
IO Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select [Enabled] if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install add-on FDC or the system has
no floppy drive, select [Disabled] in this field. Setting options: [Enabled], [Disabled].
COM Port
Select an address and corresponding interrupt for the first serial port. Setting
options: [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [2F8/IRQ3], [Disabled], [Auto].
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides
Standard, ECP, and EPP features. It has the following options:
[Disabled]
[3BC/IRQ7]
Line Printer port 0
[278/IRQ5]
Line Printer port 2
[378/IRQ7]
Line Printer port 1
Parallel Port M ode
This field selects the operation mode for the onboard parallel port. Setting options:
[SPP]
Standard Parallel Port
[EPP]
Enhanced Parallel Port
[ECP]
Extended Capability Port
[ECP + EPP]
Extended Capability Port + Enhanced Parallel Port
[Normal]
EPP M ode Select
The onboard parallel port is EPP Spec. compliant, so after the user chooses the
onboard parallel port with the EPP function, the following message will be dis-
played on the screen:
“
EPP Mode Select.
”
At this time either [EPP 1.7] spec or
[EPP 1.9] spec can be chosen.
