M S-7246 M ainboard
D-14
Connector Settings
Click
to access connector settings.
Disable front panel jack detection (option)
Find no function on front panel jacks? Please check if front jacks on your system are
so-called AC
’
97 jacks. If so, please check this item to disable front panel jack detection.
Enable auto popup dialogue, when device has been plugged in
Once this item checked, the dialog
“
Connected device
”
would not automatically pop
up when device plugged in.
Before you begin using the front panel function, please complete the following steps:
1. Please install the JAUD1 pin headers for the front panel according to
Chapter2
Hardware Setup.
2. Select
Enable
for Azalia,
Disable
for AC
’
97 in the
Azalia/AC97 Audio Select
BIOS setting. Please refer to
Chapter 3
.
3. If you are using
Azalia
setting, the microphone function on the front panel is fixed,
but the headphone jack will auto detect the device you connect and pop-up the
selection window.
4. If you are using
AC97
setting, both microphone and headphone on the front panel
are fixed.
