19
Eco Trolley Manual revision 01/10
8.2 ORDERING SPARE PARTS
We remind you that the machine can only be repaired by a qualified technician.
It is hence recommended to contact the Manufacturer After-sales Service that will make available Qualified
Personnel, suitable equipment and original spare parts.
To order above-listed spare parts, please refer to paragraph 1. 2
9 SCRAPPING
9.1 DISPOSING OF WASTE
During processing, waste or rejections are created that shall be collected, recycled or disposed of, in
compliance with the prevailing laws of the country where the Machine is installed.
9.2 MACHINE SCRAPPING
Upon unit scrapping, separate the plastic parts from any electrical components, that shall be sent to
different waste disposal centres, as per prevailing rules.
The machine metal parts shall be divided into steel and other metals or alloys, and then routed to recycling
firms.
Unit scrapping does not cause any special risk, as far as it is performed by qualified personnel with suitable
equipment.
10 ANNEXES
10.1 DECLARATIONS
The following Declarations are hereby attached:
•
Declaration of conformity
10.2 DIAGRAMS
The following Diagrams are hereby attached:
•
Electric circuit diagram and key;
•
Pneumatic circuit diagram;
•
Machine exploded view.
