Eco Trolley Manual revision 01/10
10
4.4 ASSEMBLY
Exhauster can be assembled either by the technicians authorised by the manufacturer or directly by the
customer, following these steps:
Unpacking.
Remove
all packing material from the machine, using suitable tools and setting it in a suitable place.
Dispose of the packing material according to the prevailing environment protection regulations.
(Visually)
check
machine external parts for damage, carefully ensure that there are no scratches, denting
or damaged parts.
Report
any fault, failure or missing parts found within five days from machine arrival. Beyond this term the
Manufacturer is no longer liable for the machine supplied.
WARNINGS AND PRECAUTIONS for installation
Always start by checking correct operation, assembly and efficiency of controls and safety systems.
In case
you find operating faults, immediately stop the machine and contact the AUTHORISED AFTER-SALES
SERVICE.
Pay attention
to the adhesive nameplates on the machine. Should they become damaged or
illegible, promptly change them. For this operation contact the AUTHORISED AFTER-SALES SERVICE or
the Manufacturer. Have
any maintenance intervention
-as per the definition of "user" given in the
foreword section- performed by qualified personnel.
Using spare parts
that do not comply with the
following specifications, any change or tampering (though small as they may be) relieve the Manufacturer
of any liability concerning the correct use, operation and safety of persons and/or property.
It is strictly
forbidden
to tamper with equipment, control organs and safety devices.
Dispose of waste
as required by
the prevailing laws.
If the machine is used by many operators
, all of them shall read the instructions for
use and indicate any maintenance intervention or parts replaced, or just suspected faults on the servicing
data sheet.
4.5 SET-UP
The only operation to be performed with a trolley-mounted turbine exhauster is to unload the machine from
the pallet for transport. Use a fork lift to carry out this operation.
