8
Figure 7. Elements of the clutch and/or valve test window:
1 – start button; 2 – information field for test results;
3 – current through the clutch coil or valve.
Figure 8. Elements of the compressor output window:
1 – start button; 2 – current cycle time clock;
3 – information field for test results.
Figure 9. Elements of the noise test window:
1 – start button; 2 – button to confirm the abnormal noise;
3 – button to dismiss the abnormal noise; 4 – information field for test results.
3 – «Productivity test» - to check the compressor output. Press the start button – 1 to launch the
test (Fig 8). The test result will be displayed in the information field – 3 (Fig.8) as follows: “Ok” –
positive test result, “Failed” – negative test result..
4 – «Noise test» - to detect the abnormal noise coming from the compressor at different speeds.
Press the button -1 to launch the test. During testing it is necessary to confirm or to dismiss the
noise presence (Fig. 9, n. 2 or 3).
5 – Buttons “Start” and “Stop” (Fig.5) – to launch and stop respectively the test procedure run in
automatic mode. Button “Start” launches tests 1-4 (Fig.5) in automatic mode. To perform a proper
diagnostics, follow the indications of the screen. Automatic test can be stopped by pressing
button “Stop” at any moment of time.
1
2
3
2
1
3
1
2
3
3
Operation manual - test bench MS111
English
