MSA Rail Slider™ Anchorage Connector
3
Safety Regulations
US
1
Safety Regulations
1.1
Correct Use
The MSA Rail Slider Anchorage Connector is designed for use by one person working at an elevated
work level. The MSA Rail Slider Anchorage Connector links the user to a rail anchorage point. It allows
the worker to utilize existing rails as temporary anchors, without the need for drilling or permanently
attaching anchorages. It moves with the worker allowing for continuous tie off.
1.2
Compliance
The product may comply with:
•
ANSI Z359.18, Type A and / or;
•
OSHA requirements
See product label for specific compliance notifications.
Anchorage connectors labeled with ANSI Z359.18 have been tested in compliance with the require
-
ments of ANSI/ASSE Z359.7.
NOTICE
ANSI compliance and testing covers only the hardware and does not extend to the anchorage and
substrate to which the anchorage connector is attached.
1.3
Usage Specifications
•
The MSA Rail Slider Anchorage Connector is capable of withstanding a load of 5,000 lbf (22.2 kN)
without breaking or permanent deformation.
•
The MSA Rail Slider Anchorage Connector is designed for the attachment of a single personal fall
arrest system.
•
Weight: 6,0 lbf (2,9 kg)
•
Materials of construction: SA516 Grade 70 Steel
•
When used as part of a personal fall arrest system, fall arresting forces must not exceed 1,800 lbf
(8 kN).
•
The Rail Slider Anchorage Connector is designed for use by one person. See instructions and
labels on each fall protection subsystem component to determine the limiting user weight capacity
of the system.
