MSA Rail Slider™ Anchorage Connector
13
Use
US
CAUTION!
Check for proper fit along the entire length of the rail the device is to be used on.
(8)
The MSA Rail Slider is now functional.
(9)
To remove the Rail Slider from the rail, follow the Connecting Instructions in reverse.
Fig. 5
Profile plates are locked and
secured
(6)
Attach an approved carabiner (Autolock) into
the attachment hole.The recommended cara
-
biner for use with the Rail Slider is SRCC643;
acceptable substitutes are, 10046182,
10089207, and 10089209. Once the carabiner
is locked in place the profile plates are now
locked and secure.
Fig. 6
Carabiner connected through the
closed eye of the Rail Slider
(7)
Attach an approved lanyard/harness to the
carabiner. Ensure that the hardware is compat
-
ible.
ONLY USE APPROVED HARDWARE.
Approved lanyards must end in one of the
following connections; SRCC643, 10046182,
10088270, 10088291, 10089159, 10089205,
10089207, or 10089209.
