MSA Rail Slider™ Anchorage Connector
12
Use
US
Fig. 2
Check width of the rail head
Fig. 3
Profile plates flush with each
other
(4)
Align the second Rail Slider profile plate with the
first plate. Permit passage of the receiving bolts,
the top flat section of the profile plates shall be
flush with each other.
Fig. 4
Profile plates are locked
(5)
Once the profile plates are flush with each other,
slide each plate in opposite directions parallel to
the rail. The plates are now locked on the crown
of the rail.
MEASURE WIDTH OF RAIL
HEAD AT THIS POINT.
WORN HEAD OF RAIL
