5
Connecting to the BACnet Router
5.1
Using the FieldServer Toolbox to Discover and Connect to the BACnet Router
•
Install the Toolbox application from the USB drive or download it from the MSA Safety website.
•
Use the FS Toolbox application to find the BACnet Router and launch the FS-GUI.
NOTE: If the connect button is greyed out, the BACnet Router’s IP Address must be set to be on the same
network as the PC. (Section
)
5.2
Using a Web Browser
•
Open a web browser and connect to the BACnet Router’s default IP Address. The default IP Address of the FieldServer
is
192.168.2.101
, Subnet Mask is
255.255.255.0
.
•
If the PC and the BACnet Router are on different IP networks, assign a static IP Address to the PC on the 192.168.2.X
network.
NOTE: Check Section
11.4 Internet Browser Software Support
for supported browsers.
BACnet Router Start-up Guide
11
