manualshive.com logo in svg

MS Topcoat A4, Service Manual, Page: 34 / 37

Share
Download
MS Topcoat A4 Service Manual Download Page 34

DECLARATION OF CONFORMITY

Product Description / Object of Declaration:

 

Powder Applicators -

 

M4 Topcoat Manual Applicator 835069

 

A4 Topcoat Automatic Applicator 835070

 

used with  MS Topcase S4 Controller Models 615300 and 615305

This Product is designed for use with:

 

Ignitable Coating Powders

Suitable for use in hazardous area:

 

Zone 21 Applicators, Controllers Zone 22

Protection Level:

 

II 2D 2 mJ

 

Certificate: PTB 16ATEX 5003

 

Certificate: PTB 16ATEX 5004

Notified body details and role:

 PTB(0102)

 

EU Type examination and Issuing Certificate

Complies with the following provisions applying to it:  

• 2016/34/EU (ATEX Directive)

 

• 2006/42/EC (Machine Directive)

 

• 2004/108/EC (EMV Directive)

 

• 2002/95/EC (RoHs Directive)

 

• 2002/96/EC (WEEE Directive)

Applied standards:

 

• EN 50050-2: 2013 

• EN 61000-6-4: 2011

 

• EN 1127-1: 2011 

• EN 62061: 2010

 

• EN 1953: 2010 

• EN 6 10 10

 

• EN 60204-1: 2007 

• EN 50177:2009/A1:2012

 

• EN ISO 80079-34: 2012 

 

• EN 60529: 2000 

 

• EN ISO 12100: 2011 

 

• EN 61000-6-2: 2011 

 

Applied national technical standards and specifications, in particular:

 

• BGI 764

Identification:  

Topcase 

M4/A4

 

 

• PTB 16 ATEX 5004 

• PTB 16 ATEX 5003

 

• IP64 85°C 

• EN 50050-2

 

• EN 50050-2, EN 50177 

This Declaration of conformity / incorporation

 

is issued under the sole responsibility of the

 

manufacturer:

 

Carlisle Fluid Technologies Inc.

 

16430 N Scottsdale

 

Scottsdale, AZ 85254

Signed for and on behalf of 

Carlisle Fluid Technoligies:

DJ Hasselschwert

16-Feb-18

Vice President: 

Global Product Development

Providing all conditons of safe use / installation stated within the product manuals have been complied with and also installed 

in accordance with any applicable local codes of practice.

0518         II (2) 3D

EU DECLARATION OF CONFORMITY

This Declaration of conformity / incorporation is issued under the sole responsibility of the manufacturer:

ATEX Directive 2014/34/EU

by complying with the following statutory documents and harmonised standards:

EN 50050-2: 2013 Electrostatic hand-held spraying equipment. Safety requirements. Hand-Held spraying 

equipment for ignitable coating powder

EN 50177: 2010 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements

0518         II (2) 3D

PA-17-06-R1  (08/2018)

34 / 37

www.carlisleft.com

EN

PARTS IDENTIFICATION

Summary of Contents for Topcoat A4






































Reviews:

No comments