INSTALLATION
SAFE HANDLING OF THE
AUTOMATIC POWDER GUN
1. Never point powder spray at any person.
2. Persons with pacemakers may not at any time stand in the
area between the spray gun and the coated work piece.
A high voltage field is created here.
COMMISSIONING AND
OPERATION OF MS TOPCOAT
A4 AUTOMATIC POWDER GUN
CAUTION
!
NOTE
Before you begin the installation and
commissioning, take a moment to familiarize
yourself with the relevant manuals.
Check that all components for mounting are
provided.
A high quality of compressed air is necessary
for operation of the powder coating system.
When connecting the powder spray gun, the con-
trol unit and the accessories, the controller must be
switched off by using the main switch.
CAUTION
!
You must be familiar with the operation of this
device before switching it on.
DO NOT touch the gun nozzle when high voltage
is switched on.
Do not stand in front of the spray gun.
Connecting Automatic Powder Gun
The powder hose connects via a quick disconnect. This en-
ables a rapid plugging and unplugging of the powder hose
by a spring.
The controller connector is permanently assembled in the
rear cover.
3
4
1
2
WA R N I N G
!
Turn off the power at the control unit before discon-
necting cables at either gun or controller end.
3. In case of error, solve the error as described in the section
Maintenance: Troubleshooting.
4. Comply with local regulations for occupational safety and
accident prevention regulations at all times.
5. Follow the information in this manual at all times, particularly
the general safety instructions and warnings.
1. Preassembled electrical connection fix
2. Powder hose connector
3. Gun air connection
4. Controller connector
PA-17-06-R1 (08/2018)
25 / 37
www.carlisleft.com
INSTALLATION
EN