Installation Instructions
1. Ensure there is a true earth ground connection available.
Connect the powder source and air hose ground to this
connection.
2. Connect the air hose to the automatic gun.
3. Connect the controller cable to the back of the gun and
the controller. Make sure the controller is switched off.
4. Using controller, turn on and actuate air without powder.
Check for air leaks in the connectors.
5. Turn off the power to the powder gun using the controller.
6. Attach the powder hose to the back of the gun.
7. Turn on the powder gun using the controller and check
for leaks in the powder connections.
Connectable Controller's MS Topcoat
Automatic Powder Gun
The MS Topcoat manual powder spray gun may only be
operated with one of the following controllers:
• MS Topcase Basic (615300)
• MS Topcase Deluxe (615305)
• MS Module (610189-10)
WA R N I N G
!
These devices may be used only for the applica-
tion described above.
PA-17-06-R1 (08/2018)
26 / 37
www.carlisleft.com
INSTALLATION
EN