MS ENERGY NEUTRON n3, Instruction Manual

Page: 216 / 244

ENG
19
 When charging the battery, place it in a dry, ventilated environment.

After charging, be sure to return the protective rubber cover on the scooter!
Entry of dust, water or other foreign objects into the slot can damage the
scooter!
Disc brakes
If you feel the brake is tight when you are riding, you can adjust the disc brake by loosing
the screw on the Rotary Knob with a M5 hex wrench (As shown in below picture), turn
the Rotary knob to the right by a little and tighten the screw with a M5 hex wrench. If
you feel the brake is loose. you can turn the Rotary knob to the left by a little after
loosing the screw on the Rotary Knob with M5 hex wrench, and then tighten the screw
Handle shake
If you feel the standpipe is loose and shakes when you are riding, please use the M5 hex
wrench to reinforce the screw as below picture referred.
Fine adjust
Do not twist the
screw unless it's
not necessary