MS ENERGY e-bike i10, Instruction Manual

Page: 276 / 308

ENG
21
Table of regular inspection and maintenance
Note : the above table is for general reference, and an appropriate maintenance cycle
should be shortened or extended based on the working environment, using frequency,
the quality and new old rate of electric bike and other conditions;
7 Riding technology
A correct cycling posture is the mother to safety: the riding posture is
determined by the position of figure and shadow of the contact point
(handlebar, seat, Pedal) of the bicyclist and bicycle. However the posture is
closely related to the height and size of the bicyclist. So a single‐bicycle cycling
posture not only determines the efficiency of muscle contraction movement,
but at the same time determines whether the bicyclist can manipulate the
handlebar and brake safely. Therefore, a correct cycling position is the mother
to safety. The safe cycling techniques are described one by one in the following:

Adjust three points to suit your body; bicycling is just like doing the clothes,
and it is necessary to measure the figure and make adjustments. The
method of adjusting three points is a combination of bicycle sports
mechanics, exercise physiology and safety driving three principles.
Adjust
Check or Clean,
Replace
Replace Wind
Lubricate
Inspection Item
First
purch‐
aise
60 days 180 days 360 days 540 days 720 days
1
．
Is the height of the handle seat proper
2
．
Are the handle and steering parts
worn
3
．
Is the chain too loose
4
．
Is the brake too flexible
5
．
Is the brake shoe block worn
6
．
Is the Rim biased or deformed
7
．
Is the spoke bent or loose
8
．
Do all bearing portions act flexibly