User manual
500GD
MRU GmbH, D-74172 Neckarsulm
19 / 52
5
Measuring
DANGER
Danger when used improperly
Deadly accidents can be the result if the rules are not
obeyed.
The analyzer may only be used for its intended
purpose.
DANGER
Explosion danger in EX zones
There is a possibility of explosion in an EX-zone.
The analyzer may only be used in explosion free
zones.
5.1.
Inserting interchangeable sensor
Please note that there are two different ways of plugging in the inter-
changeable sensors. Some interchangeable sensors do not require a
screwed-on probe tube. The analyser automatically detects whether a
probe tube needs to be screwed on. The analyser will display a
corresponding message.
Use interchangeable sensor without probe tube
►
Insert the desired interchangeable sensor into the sensor
con-
nector.
►
Make sure that the interchangeable sensor clicks into place audibly.
►
Switch on the analyser.
See also Chapter 4.3 Switching on the analyser, Page 14.
The analyser automatically identifies the inserted
interchangeable sensor.
An information window appears in the display for approx. 5
seconds.
Depending on the interchangeable sensor, a warm-up phase
appears.
