User manual
500GD
MRU GmbH, D-74172 Neckarsulm
27 / 52
Starting measurement
►
Plug the desired interchangeable sensor into the sensor connection.
See also chapter Use interchangeable sensor without probe tube,
Page 19.
In the Display "HM400" appears.
The measurement starts.
Configuring measurement
For settings that can be made on the basic unit
See also chapter 4.4.Make settings on the basic unit, S.15
In the following, only sensor-specific settings are described.
Selecting measured values
With the interchangeable sensor HM400, it is possible to display all
measured values on the display. However, you also have the option of
displaying a single measured value with a measurement curve in the
display.
