User manual
500GD
MRU GmbH, D-74172 Neckarsulm
15 / 52
Insert an interchangeable sensor.
If necessary, a warm-up countdown appears (e. g. with HC400)
The measurement menu is being displayed after warmup.
The analyser is ready to measure.
4.4.
Make settings on the basic unit
The menu structure is dynamic. The menu structure changes depending
on the inserted interchangeable sensor. In the following, only settings
are shown that can be carried out on the basic unit without am inserted
interchangeable sensor. The settings shown here can also be made with
an inserted interchangeable sensor.
Sensor-specific menu items are explained in the corresponding
explanation of the respective interchangeable sensor.
►
Switch on the analyser.
The analyser indicates that an interchangeable sensor is missing.
►
Press "OK".
►
Choose "Settings".
A selection list appears.
►
Choose the desired setting.
Setting options for QR code
The analyser uses the QR code to transmit a simple "measurement pro-
tocol".
The analyser supports QR code from firmware version V1.00.20.
If an older firmware version is installed, the firmware can be updated.
The following options are available:
•
Text mode:
the protocol is transmitted in the form of a text module that can be
pasted or saved in a document.
•
E-mail mode:
the protocol is transmitted in the form of a text module. The text
