Page 28
Copyright © 2022
Master configuration
In order to operate your wallboxes in a network, first start with the configuration of the master. To
do this, select the “Add New Device” button under the “Load Balance” menu item. To create a
master, enter the number 0 in the "Slave ID" field. The "Device ID" can be found under the menu
item "Device Info". Then select a priority with which the master wallbox should charge and confirm
with the "Add Device" button.
Slave configuration
Now you can add more slave wallboxes. To do this, repeat the steps beginning with "Add New
Device". Enter consecutive numbers for the other slave wallboxes in the "Slave ID" input field. You
can assign IDs from 1 to 15 for this. When configuring, make sure that priority A is only assigned to
one wallbox!
Prioritization and load sharing
When load balancing the wallbox, different priorities can be assigned to the individual wallboxes.
Priorities A, B and C are available.
Priority C
is preset by default. In this configuration, all wallboxes have the same priority. This means
that all the power available in the system is distributed equally to the wallboxes with priority C.
A
Priority B
wallbox has twice the power available compared to a Priority C wallbox:
