MREL DATA TRAP II, Operation Manual

Page: 16 / 60

DataTrap II™ Operations Manual - Edition 5.4
12
DC IN Connector:
Used to connect the DataTrap II™ Data/VOD Recorder to the Battery Charger to recharge the DataTrap II™ Data/VOD Recorder internal
battery, and to operate the DataTrap II™ Data/VOD Recorder from AC mains power.
USB Connector:
The USB port is used to connect the Communications Cable to the DataTrap II™ Data/VOD Recorder . The other end of the Communications
Cable is connected to a USB port of the computer. A USB 2.0 port is recommended. USB 1.1 can be used, but downloading data is much
slower. Be careful NOT to plug the Power Cable into the USB port .
SYNC IN and OUT Connectors:
The SYNC in and out ports are used to synchronize the time codes of several DataTrap II™ Data/VOD Recorder units working together.
If synchronization is required to be used with multiple units, contact MREL for instructions with the software required .
BNC INPUT Connectors:
BNC connectors for connecting DC gauges or VOD probes (if VOD Upgrade is present) to inputs of channels to 8. The operator can check
which channels will be active in the next test by using the display menu.
Black Vent
TRIG’D Indicator