22
Pb1= actual value - meter
measurement
PK1
full-degree
adjustment
correcting the error occurred
by the sensor measurement at
high temperature.
PK1=100º（actual value - meter
measurement）
﹙－999~999º﹚
0
AP－ normally open-
normally closed
contact
parameter
when
the
temperature
measurement value is ≤ AP,
the normally open contact
point conducts, otherwise
normally closed contact point
is turned on.
﹙rL~rH） 0
CPS
circulation
pump mode
CPS=0：the cooling and heating
allowable buttons can be
turned on individually.
CPS=1：after the circulation
pump is turned on, cooling and
heating allow to work.
﹙0 ~1﹚ 1
nt
nod
set value mode
Nod=0：set manual adjustment
Nod=1：setting value will be
adjusted
automatically
according to the 4-20mA input
signal.
1
SPL
4
－
20mA
conversion zero
position
the zero of the setting value
corresponding to 4mA
(－150~0) ―150
º
SPH
4
－
20mA
conversion
full-degree
the zero of the setting value
corresponding to 20mA
(－0~300º)300º
4
Pb3
4 － 20mA zero
adjustment
Corrects the error generated
in the low temperature section
of the 4-20mA signal. Pb2=
actual temperature - meter
measurement temperature
﹙－99.9 ~99.9）
0
PK3
4
－
20mA
full-degree
adjustment
Corrects the error generated
in the high emperature section
of the 4-20mA signal .PK3=1000
º（actual temperature - meter
measurement temperature）
﹙－999~999º﹚
0
Addr address
local address
（1 ~16） 1
