17
button, the controller automatically saves the set parameters
and exits the temperature setting state. In the temperature
setting state, if there is no buttons to be pressed within 60
seconds, the controller will automatically return to the normal
state and the parameters will not be saved.
In the non-setting state, click the “decrease/view” button,
the upper row display “TS1”, and the lower row display the
first set temperature setting value; then click “down/view”
button to display “ TP1”, and the lower row shows the first
set temperature measurement value. Wait for 5 seconds and then
click on the "decrease/view" button to exit the first set
temperature view state.
3. Circulation pump control
In the non-set state (invalid in the temperature setting
and parameter setting), click the "cycle allow" button to
control the pump on or off.
Note: When the value of cps (see parameter list 2) is 1, the
circulation pump must be turned on, and the cooling and heating
keys will work; when the cps value is 0, the cooling and heating
allowable keys can be turned on independently.
4. Heating control
In the non-set state (invalid in the temperature setting
