12
4.2.5 Nameplate information
AH.VPXX-XXXX-XXXX
Fig.5 Nameplate information
4.3.1 Water shortage detection component
Built-in water flow sensor. If water bath is short of water, the equipment will stop heating, and a
water shortage alarm message will appear on touch screen;
4.3.2 Heater overheat protection component
Built-in overheat protector. If water bath is seriously lacking in water or equipment fails,
the heater power supply will disconnect . when water filling is completed or the failure is
removed, equipment can only work normally after the heating reset button is pressed;
The location of heating reset button is shown in the following figure:
Fig.6 heating reset button