MRC MTX5000, User And Technical Manual

Page: 67 / 150

Routine Operation 3-33 MTX5000 User and Technical Manual
2. Select the Offset option button and observe the
Offset screen is displayed. See Figure 3-54 .
Figure 3-54: Offset Screen - Typical
3. Select the Offset option button required, observe the
Main screen is displayed, and observe the new offset
setting is displayed.
See Figure 3-55 .
Figure 3-55: Main Screen - Typical
Offset
Main
PA On
SUM
ODU
IDU
RF
L/R
H
- 0 +
L
Main Screen
Option Button
Offset
Option
Buttons
Channel 1 Offset
Antenna Ant. Pol. Antenna1 V
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup
Status -> PA On
SUM
ODU
IDU
RF
L/R
H
_
L
New
Offset
Setting
3.6.5 Select Antenna
The procedure required to select a different antenna is contained
in the following steps. When performing the following steps, a
navigation option button to return you to the Main screen will be
displayed at the bottom of the
Antenna screen.
When the new antenna is selected, the Main option button must
be selected, the Main screen will automatically be displayed, and
the updated system status associated with the
Antenna option
button will display the new selected antenna.
If the Main option button is selected to return to the Main screen
without selecting a different antenna, the Main screen will be
displayed and no changes will be made to current MTX5000
settings.
Note In the following steps, option buttons may be
selected using either the touch screen or the
function keys and the
SEL key.
1. Observe the Main screen is displayed. See Figure 3-
56 .
Figure 3-56: Main Screen - Typical
Channel 1 0 Offset
Antenna Ant. Pol. Antenna1 V
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status Setup Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
Antenna
Option
Button