MRC MTX5000, User And Technical Manual

Page: 72 / 150

Routine Operation 3-38 MTX5000 User and Technical Manual
2. Observe the IDU Status screen is displayed. See
Figure 3-67 .
Figure 3-67: IDU Status Dialog Box - Typical
3. When review of IDU Status messages is complete,
select the OK option button and observe the IDU
Status screen is no longer displayed.
3.6.11 Monitor SUM Errors
The procedure required to monitor current summary alarms in
the MTX5000 Transmitter System is contained in the following
steps.
Note In the following procedure, the SUM status button
may be selected using either the touch screen or
the function keys and the
SEL key.
Note The SUM status button may be selected from the
Main screen or from any screen that is accessible
from the Main screen. The screen shown in
Figure 3-68 on page 3-38 is therefore typical.
1. Select the SUM status button. See Figure 3-68 .
O K
ID U Status
xxxxxxxxxxxxxxxxx
Figure 3-68: Main Screen - Typical
2. Observe the Summary Alarm screen is displayed.
See Figure 3-69 .
Figure 3-69: Summary Alarm Dialog Box - Typical
3. When review of Summary Alarm messages is
complete, select the OK option button and observe the
Summary Alarm screen is no longer displayed.
3.6.12 Monitor Current Preset Status Settings
The procedure required to monitor Preset status settings are
contained in the following steps.
Channel 1 0 Offset
Antenna Ant. Pol. Antenna1 H
RFU2
7US
RF Band
Preset A
Analog
4.83 & 5.8, 3MHz Vid Dev
RF Output
XX
dBm
<- Status
Setup Status ->
PA On
SUM
ODU
IDU
RF
L/R
H
L
SUM
Status
Button
O K
S um m ary A larm
xxxxxxxxxxxxxxxxx