MRC MTX5000, User And Technical Manual

Page: 54 / 150

Routine Operation 3-20 MTX5000 User and Technical Manual
The Color Bar Generator (CBG) has four operating modes that
may be selected as follows:
• Off - Color bars and audio test tones are turned off.
• On - Color bars and audio test tones are continuously
turned on. This mode should be used for test or
troubleshooting only.
• A Gen (Auto Generated) - If a loss of video signal occurs,
color bars and/or audio test tones are transmitted after a
specified delay.
• A Stby (Auto Standby) - If a loss of video signal occurs,
the transmitter is automatically placed into standby (PA is
turned off).
Change Pwd Option Button The Change Pwd option button
provides the means to change the system password. This option
button should only be used by the technical staff.
For information on changing the system password, see ”Local
Mode Password Control” on page 5-3 .
System Info Option Button When the System Info option
button is selected, the System Info screen will be displayed.
See Figure 3-24 .
The System Info screen will display the current software
versions contained in the MTX5000 IDU.
Figure 3-24: System Info Screen - Typical
3.5 Select Local/Remote Operation
Mode
CAUTION Avoid damage to the color LCD display
panel!
The color LCD display panel touch screen
may be damaged if a sharp, hard-pointed
object, such as a pencil or a pen, is used to
select the displayed options.
Touch screen options must only be selected
using your fingers, a soft-pointed stylus, or
the front panel function keys.
Damage to the color LCD display panel
caused by using a hard-pointed object or
other misuse may void your warranty on
the MTX5000 IDU.
System Info
Back
MTX5000 Control Software V.00.04.XX
Serial #:
XXXXX_XX
Date of Manufacture: 03.17.09
System Type Type 11
2.0.0 Analog Software 2.0.1
SCM Software 3.0.1 MPEG Software