LCEN-401P
11
⚫
The door can be released automatically when the operation has stopped.
⚫
With the door closed, you are able to press the
button to open it.
⚫
After ending the operation, the program will store the setting parameters of this operation, and will
recall these parameters when restarting the program.
（
3
）
Open the door and take out the rotor and samples.
9.2 RCF operation
（
1
）
Turn on the power switch
（
2
）
Set a RCF (Relative Centrifugal Force) value
CAUTION
⚫
Do not exceed the allowable maximum RCF value of the rotor and adapters.
⚫
Press the step button
for 5 seconds and the speed symbol will flash into RCF value input
status, press again for 5 seconds to return RPM value input mode.
⚫
Rotate program knob
to input a RCF value, RCF increment is10×g.
（
3
）
Set operating conditions
The other operation, please refer to the section 8.1.
9.3 Reset
If you need reset the programs parameters, press the door button
for 10 seconds;
10. Maintenance
10.1 Cleaning
CAUTION
⚫
If do not follow the recommended instructions for cleaning or disinfecting this may damage the
centrifuge.
（
1
）
Centrifuge
⚫
If the centrifuge is exposed to ultraviolet rays for a long time, the color of the door may be changed or
the label may be peel off. After using, cover the centrifuge with a piece of cloth to protect it from
