LCEN-401P
9
9.1.1
Preloaded Programs Operation
1
）
PRP Program
（
1
）
Press the
button to select PRP program. Press button
to start running.
⚫
The door must be locked before rotor starts spinning.
⚫
Timer will operate once the speed setting value is reached, the screen displays the remaining run time.
（
2
）
View and modify the operation programs
⚫
Press parameter knob
for 5 seconds, When flashing, rotate parameter knob
to modify values.
Release the button after 5 seconds, and the centrifuge will save the new value.
（
3
）
Warning display
⚫
If an error occurs during the operation, the centrifuge will brake to stop automatically, and display the
error code on the time/display area. The error code can be checked in the table 11-1, and corrective
actions can be applied accordingly.
2
）
PRF Program
（
1
）
Press the
button to select PRF program. Press button
to start running.
⚫
The door must be locked before rotor starts spinning.
⚫
Timer will operate once the speed setting value is reached, the screen displays the remaining run time.
（
2
）
View and modify the operation programs
⚫
Press parameter knob
for 5 seconds, When flashing, rotate parameter knob
to modify values.
Release the button after 5 seconds, and the centrifuge will save the new value.
（
3
）
Warning display
⚫
If an error occurs during the operation, the centrifuge will brake to stop automatically, and display the
error code on the time/display area. The error code can be checked in the table 11-1, and corrective
actions can be applied accordingly.
3
）
CGF Program
（
1
）
Press the
button to select CGF program. Press button
to start running.
⚫
The door must be locked before rotor starts spinning.
⚫
Timer will operate once the speed setting value is reached, the screen displays the remaining run time.
（
2
）
View and modify the operation programs
⚫
Press parameter knob
for 5 seconds, When flashing, rotate parameter knob
to modify values.
Release the button after 5 seconds, and the centrifuge will save the new value.
（
3
）
Warning display
⚫
If an error occurs during the operation, the centrifuge will brake to stop automatically, and display the
