MRC DRS4000, User And Technical Manual

Page: 52 / 88

Routine Operation 2-36 DRS4000 Receiver User and Technical Manual
2.13.4 Change RF, Demodulator, and Packet
Switch Configuration Settings
The procedure required to change RF settings, including
channel, frequency, and RF band; demodulator settings,
including mode and polarity; and packet switch settings,
including unit mode, ASI mode, default service name, and ASI
bitrate, is contained in the following steps.
1. Verify the DRS4000 is connected to the remote PC
per
“Connect to the Web Browser” on page 2-34 .
2. Select the Tuner/Demodulator Configuration tab.
See Figure 2-50 .
Figure 2-50: Tuner/Demodulator Configuration Tab - Typical
3. Select pull-down menu(s) or text box(es) to be
changed, make required change(s), and select the
corresponding
Change option button.
2.13.5 Change Decoder General Settings
The procedure required to change general decoder settings is
contained in the following steps.
1. Verify the DRS4000 is connected to the remote PC
per
“Connect to the Web Browser” on page 2-34 .
2. Select the Decoder Configuration tab. See Figure 2-
51 .
Figure 2-51: Decoder Configuration Tab - Typical